rudder foot controls

This is the main discussion forum.
Post Reply
User avatar
KFDU Angler
Posts: 75
Joined: Mon Dec 17, 2012 9:07 pm
Local Fishing Region: townsville
Kayaks: Profisha 525 . Mirage 583
Location: Townsville

rudder foot controls

#1 Post by mickyt » Thu Jan 30, 2020 2:16 pm

Hi, has anyone bought and fitted those aftermarket cheap rudder foot controls on eBay . the screw holes are tiny. I would like to know the best way.

User avatar
KFDU 1000 Club
Posts: 1488
Joined: Thu Jul 22, 2010 11:08 am
Local Fishing Region: Southern NSW
Kayaks: Adventure Island and Stealth Profisha 525
Location: NSW

Re: rudder foot controls

#2 Post by XDCammer » Fri Jan 31, 2020 8:36 pm

I'd have to look at it mate (in the flesh). Southern NSW is a bit far I think though.
Just thought I'd give a response on behalf of the site. It dosn't seem anyone else will. So for what it's worth. Remember, PE boats can be welded. So if you decide to tinker, it's ok if you drill the hole in the wrong spot.
Remember..... you will need axcess inside the hull to tighten the nut on the inside, for both the gas peddles and the rudder itself. If you don't have access you will have to use wellnuts, or self tappers (depending how thick the plastic is)
Good luck anyways.

Cheers BobbyB
Time spent on reconnaissance is time never wasted.

User avatar
Steve R
KFDU 1000 Club
Posts: 1095
Joined: Fri Jun 15, 2012 10:10 am
Local Fishing Region: Eden and thereabouts
Kayaks: Hurricane Skimmer; Racing TK1 (Mr Tippy).
Location: Eden

Re: rudder foot controls

#3 Post by Steve R » Sun Feb 02, 2020 6:11 am

Adding to the above, try a YouTube search. There are instructions for a lot of different kayak-related things.
Many men go fishing all their lives without knowing its not fish they are after - Henry Thoreau

Post Reply

Return to “Main”