changing wheels on cart

Show everyone your rigged kayak or look for ideas here.
Message
Author
revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#16 Post by revolt » Sat Dec 01, 2018 8:52 am

Had a close look at frame work. Where axle connects the frame curves and it looks like the wheel might have enough clearance after all. Still waiting for wheels to arrive for Brisbane then all will be answered. Should have been here by now probably Christmas rush holding things up.

revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#17 Post by revolt » Wed Dec 05, 2018 1:27 am

Wheels arrived and fit on hobie cart perfectly. No problems with the recessed hub. The axle length allows for a hub width of 72mm the hubs on the sea to summit wheels are 68mm. I did make sleeves( bushes) to decrease the diameter of wheels hubs from 25mm down to 12.5mm to fit the Hobie cart axle I was able to get some 25mm diameter round solid plastic and drill a 12.5mm hole through centre to make these. Happy with the wheels definitely better than the foam filled wheeleze wheels that came on the Hobie cart originally

revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#18 Post by revolt » Wed Dec 05, 2018 1:58 pm

Try a picture?
You do not have the required permissions to view the files attached to this post.

revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#19 Post by revolt » Wed Dec 05, 2018 2:05 pm

Try another picture
You do not have the required permissions to view the files attached to this post.

revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#20 Post by revolt » Wed Dec 05, 2018 2:16 pm

Next stage will be shortening poles and fitting some plastic in pole fittings. To attach bungy chord and line to make easy self loading system with lines going through scupper holes.

revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#21 Post by revolt » Mon Dec 10, 2018 8:57 am

Now complete. All fittings stainless steel. Plastic fittings secured using silicone and stainless steel pop rivets. Bungy cord 2 mts long. Now all I have to do is try it. Cant see any problems.

revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#22 Post by revolt » Mon Dec 10, 2018 8:58 am

try photo
You do not have the required permissions to view the files attached to this post.

revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#23 Post by revolt » Mon Dec 10, 2018 9:05 am

Try again
You do not have the required permissions to view the files attached to this post.

User avatar
kiwinaus
KFDU Angler
Posts: 226
Joined: Wed Mar 05, 2008 9:38 pm
Local Fishing Region: Lithgow Oberon Hartley
Kayaks: Lime Green Sierra Hobie Pro Angler 12
Location: Mount Victoria Blue Mountains

Re: changing wheels on cart

#24 Post by kiwinaus » Tue Dec 25, 2018 7:09 am

Hey fulla I love this idea.
Can you post the the links for the wheels and where can I get the plastic for the the bushes. I’ve alreeady got the bungy’s fixed for self loading. Having the plastic wheels would allow the scupper poles to align easier as the sink under the boat. Top marks for inga ...injanu ....being a clever clogs. :lol:
PB Bass 32cm ,PB Yellow belly 61cm, PB Flattie 50cm,52cm Rainbow Trout,PB Murray Cod 56cm......Wait for it!

revolt
KFDU Angler
Posts: 84
Joined: Fri Jan 12, 2018 10:20 am
Local Fishing Region: adelaide

Re: changing wheels on cart

#25 Post by revolt » Tue Dec 25, 2018 5:52 pm

The Sea to Summit wheels I got on ebay from FreaksportsAu in Coopers Plains in Qld. The 25mm diameter solid plastic which I drilled with 12.5mm centre I got from local plastic suppliers Menzel Plastics in SA.
Last edited by revolt on Tue Dec 25, 2018 6:21 pm, edited 1 time in total.

marty7767
KFDU Angler
Posts: 49
Joined: Sun Jan 29, 2012 7:28 pm
Local Fishing Region: illawarra

Re: changing wheels on cart

#26 Post by marty7767 » Sat Jan 05, 2019 6:58 am

Try beach wheels Australia. They’re on the Gold Coast from memory. They sell wheel eez wheels at half the cost of hobie outlets. I put up a post in do it yourself as I did a conversion from inflatables to heavy duty type. A trip to Bunnings irrigation section got me the parts.

Post Reply

Return to “Rigged Kayaks”