Transducer mount

Want to work on your kayak yourself? Need some help or have any advice to offer?
Post Reply
KFDU Angler
Posts: 2
Joined: Sat Jun 30, 2018 5:08 pm
Local Fishing Region: South East Queensland

Transducer mount

#1 Post by austin0204 » Sun Nov 04, 2018 9:38 am

Has anyone mounted a humminbird parrahanamax 197c DI transducer on the Hull? Has that worked? I would test it, but I would rather check if someone else already has! Cheers yakkers

User avatar
KFDU 2000 Club
Posts: 2753
Joined: Mon May 04, 2009 9:32 pm
Local Fishing Region: Gold Coast, Qld
Kayaks: Swing 400, and Pacer
Location: Gold Coast, Queensland

Re: Transducer mount

#2 Post by Dodge » Sun Nov 04, 2018 9:57 am

All transducers I have used [various brands] have just been pushed into blob of warmed sealant inside the hull, then left to cure for a couple of days and been OK.

Found warming sealant in hot water or sun made it a bit more fluid to use.n
Cheers RICHO [the older one]
Team Member of... Old Farts.... GREEN GINGER.... GC/NRKFC .... Usually monitor UHF29
Perception Swing 400, lime/yellow .... homemade timber Anon lures
Accept some days you're the pidgeon, and on other days you're the statue

User avatar
KFDU Angler
Posts: 9
Joined: Wed Nov 08, 2017 3:43 pm
Local Fishing Region: NSW

Re: Transducer mount

#3 Post by Foghorn » Sat Jan 05, 2019 5:15 pm

My transducer, lowrance, is in the hull stuck with marine goop, works well.

Post Reply

Return to “Do It Yourself”